Mud Cleaner and Desander and Desilter
From coarse sand to ultra-fine silt, ensuring optimal fluid quality and equipment
protection
PRODUCT DETAILS
Mud Cleaner
The FSI/VPrime Mud Cleaner, manufactured in India, is a high-efficiency solids control solution that integrates advanced desilters and desanders to optimize drilling fluid recovery. Utilizing high G-force technology, it effectively removes fine solids while maintaining consistent separation across variable load conditions.
Engineered for durability and low maintenance, the mud cleaner improves fluid quality, reduces waste management costs, and supports environmental and regulatory compliance—making it a reliable, high-performance asset for demanding drilling operations.
PRODUCT DETAILS
Desander and Desilter
Fluid Systems’ high-volume 10-inch involute feed desander cones are manufactured from highly wear-resistant polyurethane and are designed to perform reliably under the most challenging conditions. Each cone handles up to 500 GPM at 75 feet of head.
Similarly, the 4-inchinvolute feed desilter cones are also made from highly wear-resistant polyurethane and deliver consistent performance, handling up to 100 GPM at 75 feet of head, even in demanding environments.
Key Features
Variable G-Forces: 10 – 15 G’s
Up to 16 × 4″ desilters per unit
Up to 3 × 10″ desanders per unit
34 sq. ft. screening area
High Performance
Linear motion
Simple design
Low maintenance cost
Small footprint
No lubrication
Low noise
Capacity: 1000 GPM - 2000 GPM
Also available as per custom design
Key Features
Variable G-Forces: 10 – 15 G’s
Up to 16 × 4″ desilters per unit
Up to 3 × 10″ desanders per unit
34 sq. ft. screening area
High Performance
Linear motion
Simple design
Low maintenance cost
Small footprint
No lubrication
Low noise
Capacity: 1000 GPM - 2000 GPM
Also available as per custom design
Product Details
Mud Cleaner
The FSI/VPrime Mud Cleaner, manufactured in India, is a high-efficiency solids control solution that integrates advanced desilters and desanders to optimize drilling fluid recovery. Utilizing high G-force technology, it effectively removes fine solids while maintaining consistent separation across variable load conditions. Engineered for durability and low maintenance, the mud cleaner improves fluid quality, reduces waste management costs, and supports environmental and regulatory compliance—making it a reliable, high-performance asset for demanding drilling operations.
Desander and Desilter
Fluid Systems’ high-volume 10-inch involute feed desander cones are manufactured from highly wear-resistant polyurethane and are designed to perform reliably under the most challenging conditions. Each cone handles up to 500 GPM at 75 feet of head. Similarly, the 4-inchinvolute feed desilter cones are also made from highly wear-resistant polyurethane and deliver consistent performance, handling up to 100 GPM at 75 feet of head, even in demanding environments.
Related Document
Mud Cleaner and Desander and Desilter
Key Features
Made from high wear-resistant polyurethane
High-capacity cone engineered to minimize plugging
40 to 100 microns separation in desander
15 to 25 microns separation in desander
Damped in volute inlet minimizes turbulence
Reduces mud loss with adjustable and interchangeable apex sizes
Grooved feed and discharge connections
Product Details
Mud Cleaner
The FSI/VPrime Mud Cleaner, manufactured in India, is a high-efficiency solids control solution that integrates advanced desilters and desanders to optimize drilling fluid recovery. Utilizing high G-force technology, it effectively removes fine solids while maintaining consistent separation across variable load conditions. Engineered for durability and low maintenance, the mud cleaner improves fluid quality, reduces waste management costs, and supports environmental and regulatory compliance—making it a reliable, high-performance asset for demanding drilling operations.
Desander and Desilter
Fluid Systems’ high-volume 10-inch involute feed desander cones are manufactured from highly wear-resistant polyurethane and are designed to perform reliably under the most challenging conditions. Each cone handles up to 500 GPM at 75 feet of head. Similarly, the 4-inchinvolute feed desilter cones are also made from highly wear-resistant polyurethane and deliver consistent performance, handling up to 100 GPM at 75 feet of head, even in demanding environments.
Related Document
Mud Cleaner and Desander and Desilter
Key Features
BUILT FOR EFFICIENCY
EXCLUSIVE BENEFITS
-
Increased Screen longevity
-
Maximizing fluid recovery and Minimizing waste volumes
-
Reducing the need for dumping and dilution of Drilling Fluids
-
High Quality Stainless Steel Wire mesh for longer screen life
-
Frame type Replacement Screens
-
Flat / Plate type Replacement Screens
-
Customized Size Screens
OUR SCREENS
ENGINEERED FOR PERFORMANCE
1. Hook Strip Flat Screens
2. Wave Screens
Hook Strip Flat Screens
Hook Strip Flat Screens
Hook Strip Flat Screens
3. Metal Frame Screens
4. Composite Screens
Process Specifications
Offshore Drilling
Onshore Drilling
-
Advanced mud cooling systems designed for extreme downhole temperatures exceeding 175°C.
-
High-capacity cooling (up to 1000 GPM) with 2.3 SG and 40% solids handling.
-
Reduces surface mud temperature, protecting surface equipments, drilling fluids & down hole tools and enhancing drilling performance
-
Engineered for high ambient temperatures (50°C+) and extreme humidity conditions.
-
Efficient cooling with high-volume capacity, reducing Non-Productive Time (NPT).
-
Supported by expert onsite technicians for safe and reliable operations.
Onshore Drilling
-
Engineered for high ambient temperatures (50°C+) and extreme humidity conditions.
-
Efficient cooling with high-volume capacity, reducing Non-Productive Time (NPT).
-
Supported by expert onsite technicians for safe and reliable operations.
Lab Equipment
Mud lab equipment is essential for analyzing and maintaining drilling fluid properties, ensuring optimal performance and well-bore stability. This equipment helps measure density, viscosity, filtration, lubrication, and chemical composition, enabling precise control over drilling fluid parameters.
-
Mud Balance
-
Marsh Funnel and Mug
-
Sand Content Kit
-
6 Speed Viscometer
-
Lubricity Tester
-
API Filter Press
-
Thermocups
-
Retort Kit
-
Hamilton Beach Mixers
-
HTHP Fluid Loss Apparatus
-
pH Meter
-
Multi-Cylinder Filter Press
Lab Reagents
Lab Reagents are essential for drilling fluid analysis, helping assess pH, viscosity, filtration, and contamination effects. They ensure accurate simulation of real drilling conditions, optimizing fluid performance and compliance with industry standards.
Key Features
BUILT FOR EFFICIENCY
Description:
EP Lube used in water-based mud to reduce torque, drag & possibility of pipe sticking. These lubricants find their application in highly deviated well bores, where a tough lubricating film is needed between the wall cake and drill string.
Benefits:
-
Decrease torque and drag
-
Reduce friction between the drill string & the open hole
-
Reduce chances of stuck pipe
-
Description:
Corrosion Inhibitor effectively prevents metal degradation by forming a protective barrier against harsh drilling environments. Works in both water-based and oil-based mud systems.
Benefits:
-
Extends Equipment Life
-
Protects drill pipes and equipment from corrosion
-
Maintains structural integrity in harsh conditions
-
Description:
PAC- L is a water-soluble polymer derived from modified cellulose. It causes a minimal increase in viscosity and provides filtration control.
Benefits:
Reduces fluid loss
Provides high temperature resistance
Prevents shale swelling and disintegration
Description:
PAC-R is a high molecular weight poly anionic cellulose polymer used in water-based drilling fluids. It functions as an effective filtration control agent while providing increased viscosity.
Benefits:
-
PAC-R is a high-yield viscosifier
-
Provides superior fluid loss control with enhanced filtration properties
-
Offers excellent thermal stability
-
Description:
Polymeric Deflocculant Liquid is a modified Tannin Based Compound. It is a versatile mud conditioner and Drilling Rheology Controller.It is highly soluble over a large range of temperatures.
Benefits:
-
Reduces fluid loss in HPHT environment
-
Environment friendly Drilling Deflocculant
-
Works over a wide range of temperature
-
Description:
These additives are used to reduce the surface tension of water-based mud systems and the sticking tendency of water sensitive cuttings.
Benefits:
-
Reduce bit balling, mud rings
-
Reduce friction & torque
-
Reduce chances of stuck pipe
-
Description:
Rig Wash is an environmentally friendly liquid detergent. It is designed for cleaning Rigs and Platforms utilizing a blend of ionic and non-ionic surfactants to effectively remove grease and grime. It works as a Heavy-Duty Degreaser and Detergent. It can also be used as Drilling Detergent in special conditions.
Benefits:
-
It can be used in all water-based drilling fluids
-
It works as an oil emulsifier in fresh water and sea water mud
-
It reduces torque and drag
-
Description:
Clean Bore efficiently removes drilling debris, oil, and residue, ensuring a clean and stable well-bore. Its high-performance formula enhances displacement efficiency and drilling fluid compatibility.
Benefits:
-
Effectively removes drilled solids and debris
-
Enhances well-bore stability and hole cleaning efficiency
-
Compatible with various drilling fluid systems
-
Maintains performance in high-temperature conditions
-
Description:
Drill Foam enhances cuttings removal and well-bore stability by generating stable foam in air and mist drilling. Its advanced formulation reduces fluid consumption and improves drilling efficiency.
Benefits:
-
Generates stable and high-quality foam for efficient cuttings removal
-
Requires a small dosage for effective hole cleaning and dust suppression
-
Provides excellent stability under high-temperature and high-pressure conditions
-
Description:
-
Bentonite API 13A Section 9
-
Bentonite API 13A Section 10
-
Bentonite API 13A Section 11
-
Description:
Bactericide prevents bacterial growth, protecting drilling fluids from degradation and contamination. Its powerful formula ensures system integrity and extends fluid life in various drilling conditions.
Benefits:
-
Effectively controls bacterial growth in drilling fluids
-
Requires a small dosage for long-lasting protection
-
Maintains stability in high-temperature and harsh conditions
-
Description:
Drilling Starch effectively reduces fluid loss and enhances well-bore stability. Its high-quality, biodegradable composition ensures optimal performance in water-based drilling fluids.
Benefits:
-
Provides effective fluid loss control in drilling fluids
-
Requires a small quantity for optimal performance
-
Maintains stability in high-temperature and saline conditions
-
Description:
High-Temperature Drilling Starch provides excellent fluid loss control and thermal stability in extreme drilling conditions. Its durable, biodegradable composition ensures optimal performance in high-temperature water-based mud systems.
Benefits:
-
Provides superior fluid loss control in high-temperature environments
-
Requires a small quantity for effective performance
-
Maintains stability under extreme heat and harsh drilling conditions
-
Description:
CHS Polyamine provides superior shale inhibition, preventing well-bore instability and minimizing clay swelling. Its high-performance formulation enhances drilling efficiency in water-based mud systems.
Benefits:
-
Effectively stabilizes shale and prevents well-bore instability
-
Requires a small dosage for optimal performance
-
Maintains stability in high-temperature and high-salinity conditions
-
Description:
Xanthan Gum/XC Polymer is a high molecular weight biopolymer. It is used as a viscosifier in drilling fluids as well as for polymer flooding in oil reservoir.
Benefits:
-
Provides excellent suspension properties
-
Stable over a wide pH range and is effective in saturated brines as well as fresh and sea water base drilling fluids
-
Resistant to bacterial fermentation
-
Description:
Drag Reducer minimizes friction, reduces pressure loss, and improves fluid flow in drilling operations. Its advanced formulation enhances pumping efficiency and overall drilling performance.
Benefits:
-
Minimizes friction and pressure loss for smoother fluid flow
-
Enhances pumping efficiency, reducing energy consumption
-
Improves overall drilling performance and rate of penetration
-
Performs effectively in various drilling fluid systems
-
Description:
Non-invasive Fluid Additive (NIFA), is a finely graded fibrous material which helps in preventing filtrate invasion.
Benefits:
-
Reduces formation damage
-
Enhances well-bore stability
-
Minimizes fluid loss
-
Improves lubrication and reduces friction
-
Optimizes drilling efficiency
-
Description:
Sulfonated Asphalt is an anionic surfactant derived from asphalt through a sulfonation process. It is commonly used as a stabilizer and dispersant in drilling fluids.
Benefits:
-
Inhibits shale swelling
-
Helps produce thin filter cake
-
Seals small fractures and enhances wellbore stability
-
Description:
CPGsare water-soluble, non-ionic surfactants that exhibit a cloud point. Theyplay a key role in wellbore stability and performance, especially in cold environments or deepwater drilling.
Benefits:
-
Prevents shale from swelling and fracturing
-
Provides higher drilling efficiency by reducing torque and drag
-
Description:
CFL is a biopolymer derived from lignin and is widely used as a mud thinner or deflocculant in water-based drilling fluids.
Benefits:
-
Effective thinning agent
-
Reduces mud viscosity, highly effective deflocculant and rheology stabilizer
-
Functions well at elevated temperatures and in the presence of contaminant
-
Description:
Partially Hydrolyzed Polyacrylamide (PHPA) is a water-soluble polymer derived from polyacrylamide. It is compatible with high-salinity and high-hardness waters.
Benefits:
-
Inhibits clay/shale swelling
-
Used as Shale Stabilizer
-
Enhances viscosity and reduces fluid loss
-
Maintains fluid weight, suspends cuttings, and improves wellbore stability
-
Key Features
BUILT FOR EFFICIENCY
Disclaimer:
BRANDT, COBRA, KING COBRA, VENOM, and VSM 300 are trademarks or registered trademarks owned by National Oilwell Varco. M-I SWACO, MONGOOSE, and MEERKAT are trademarks or registered trademarks of M-I L.L.C. Derrick, FLC500, and FCL2000 are trademarks or registered trademarks of Derrick Corporation. Continental Wire Cloth does not produce screens for NOV Brandt® or Derrick®. CWC offers compatible replacement screens that serve as alternative solutions for solids control requirements.
Related Document
Mud Cleaner and Desander and Desilter